GV2P Motor Circuit Breaker Data Reference Table
Motor circuit breakers from 0.06 to 15 kW / 400 V, with screw clamp terminals
Deca - Frame 2 (ref. GV2P): control by rotary knob
Screw clamp terminals
Standard power ratings of 3-phase motors 
50/60 Hz in category AC-3
Setting 
range 
of thermal 
trips 
(2)
Magnetic 
tripping 
current 
Id ± 20 %
Reference
400/415 V 500 V 690 V
P Icu Ics (1) P Icu Ics (1) P Icu Ics (1)
kW  kA  % kW  kA  % kW  kA  % A A  
–  –  –  –  –  –  –  –  –  0.1…0.16 1.5 GV2P01
0.06 0.16…0.25 2.4 GV2P02
0.09 0.25…0.40 5 GV2P03
0.12 0.37 0.40…0.63 8 GV2P04
0.18
0.25 0.55 0.63…1 13 GV2P05
0.37 0.37 1…1.6 22.5 GV2P06
0.55 0.55 0.75
0.75 1.1 1.5 8 100  1.6…2.5 33.5 GV2P07
1.1 1.5 2.2 8 100 2.5…4 51 GV2P08
2.2 3 4 6 100 4…6.3 78 GV2P10
3 5 50  100 5.5 6 100 6…10 138 GV2P14
5.5 7.5 42 75 9 6 100 9…14 170 GV2P16
11 6 100
7.5 50 50 9 10 75 15 4 100 13…18 223 GV2P20
9 50 50 11 10 75 18.5 4 100  17…23 327 GV2P21
11  50  50 15  10 75 –  –  20…25 327 GV2P22
15  50 50  18.5  10 75 22 4 100 24…32 416 GV2P32

(1) As % of Icu.
(2) The thermal trip setting must be within the range marked on the graduated knob.
> 100 kA.

How to use the table : select your load operating voltage, then select its standard power value (below, in the same 
column). The appropriate circuit breaker is in the extreme right column, in the corresponding row.
Exemple: GV2P04 can protect 0.12 and 0.18 kW under 400/415 V, and 0.18 kW under 440 V, and 0,37 kW under 
690 V. No 500 V standard power value can fit GV2P04.

Motor circuit breakers up to 50 HP / 600 V, UL 60947-4-1 type E
Deca - Frame 2 (ref. GV2P) with rotary handle
Thermal
setting
(A)
Maximum Horsepower ratings Group Motor 
applications
Reference
Single-Phase Three-Phase
115 V 200 V 230 V 115 V 200 V 230 V 460 V 575 V Max. Fuse or 
Circuit breaker
(A)
0.1…0.16 450 GV2P01
0.16…0.25 450 GV2P02
0.25…0.40 450 GV2P03
0.40…0.63 450 GV2P04
0.63…1 1/2 450 GV2P05
1…1.6 1/10 3/4 3/4 450 GV2P06
1.6…2.5 1/6 1/6 1/2 1/2 1 1.5 450 GV2P07
2.5…4 1/8 1/4 1/3 3/4 3/4 2 3 450 GV2P08
4…6.3 1/4 1/2 1/2 3/4 1 1.5 3 5 450 GV2P10
6…10 1/2 1 1.5 1 2 3 5 7.5 450 GV2P14
9…14 3/4 2 2 2 3 3 10 10 450 GV2P16
13…18 1 2 3 2 5 5 10 15 450 GV2P20
17…23 1.5 3 3 3 5 7.5 15 20 450 GV2P21
20…25 2 7.5 7.5 15 20 450 GV2P22
24…32 2 5 5 5 7.5 10 20 25 450 GV2P32

Leave a comment